Table of Contents
Advertisement
Send Images
If Auto Send is enabled, acquired images are automatically sent to a pre-determined location on exam
close. Refer to
Chapter A7: Set Preferences-Auto Send (Auto Push)
configuring Auto Send.
For mobile units, Auto Send will begin the next time the unit is connected to the network.
Save Changes to Images
You have the option to save or discard the changes you have made to images when you close the Image
Viewer screen or end the exam.
1. If in a live exam, press [CLOSE] on the Acquisition screen.
2. If in review mode, press [CLOSE] on the Image Viewer screen.
A message appears: "Would you like to save the changes made to the images?"
3. Press [YES].
[NO] closes the Image Viewer screen without saving changes.
Definium AMX 700 X-Ray System
Operator Manual
5161515-1EN
Rev. 6 (10 February 2008)
© 2008 General Electric Company. All rights reserved.
Chapter A5: Image Viewer
(p. A7-22) for information on
A5-27
Advertisement
Table of Contents
