Auto Adjust Head Position - Ricoh D124-17 Service Manual

4. Replacement and Adjustment
• Go into the SP mode and open SP2100-002.
• Enter the number of the print head that is abnormal.
To Service:
Head 1
Head 2
Head 3
Head 4
All
• If you need to flush more than one head (but not all). add their entry numbers and then enter
the sum. For example, to clean Head 2 and Head 3, add 2+ 4 and then enter "6"
8. If the last flushing does not correct the problem, the defective print head must be replaced.

Auto Adjust Head Position

Adjust the print head position if you see these problems in the prints:
• Broken vertical lines
• Blurred or streaked colors
1. Press the
2. Touch [Maintenance].
3. Touch [Auto Adjust Print Head Position].
536
K1 (Black)
K2 (Black)
C (Cyan)
YM (Yellow/Magenta)
K, C, Y, M
button on the operation panel.
Color You Enter:
1
2
4
8
15