Ricoh D124-17 Service Manual page 779

This SP adjusts the threshold for the tank full alert for the ink collector tank on the right
side of the machine below the maintenance unit.
• This tank has its own ID chip which holds the threshold value.
• Changing this SP setting does not write a new threshold setting onto the tank ID
chip.
• Changing this SP does tells the machine to issue the tank full warning with the count
reaches the specified percent of the threshold valued stored on the ID chip.
[1 to 200/100/1 %]
2 Change Waste Ink Box Near Full Threshold
This SP adjusts the threshold for the near-tank full alert for the ink collector tank on the
right side of the machine below the maintenance unit.
• This tank has its own ID chip which holds the threshold value.
• Changing this SP setting does not write a new threshold setting onto the tank ID
chip.
• Changing this SP does tells the machine to issue the near-tank full alert when the
count reaches the specified percent of the threshold valued stored on the ID chip.
[-99 to 99/0/1 %]
3 Waste Ink Box: Right Full Threshold
This SP adjusts the threshold for the tank full alert for the open right ink sump below the
maintenance unit and behind the ink collector tank.
• The right ink sump has no ID chip.
• Changing this SP setting changes the threshold value stored in NVRAM.
[1 to 180/147/1 ml]
4 Waste Ink Box: Right Near Full Threshold
This SP adjusts the threshold for the tank near-full alert for the open right ink sump below
the maintenance unit and behind the ink collector tank.
• The right ink sump has no ID chip.
• Changing this SP setting changes the threshold value stored in NVRAM.
[1 to 100/85/1 %]
5 Waste Ink Box: Left Full Threshold
SP2000
75