Ricoh D124-17 Service Manual page 554

4. Replacement and Adjustment
SP
4012-5
4012-6
4012-7
4012-8
Step 8: Erase Margins
Do these SPs to replace the settings done in Step 6.
SP
2103-1
2103-2
2103-3
2103-4
Step 9: Scanner Registration
1. Use the A1 LEF Test Chart to make a 1:1 copy on plain A1 LEF paper.
2. On the copy, measure the gap between the chart image at the leading edge and at the left edge.
3. Adjust these SPs if necessary.
SP Standard
4010-1 ±3 mm
4010-2 ±2.8 mm
4011 ±2.8 mm
552
Set To:
Scanner Edge Margin - DF: Leading Edge
1.5 Scanner Edge Margin - DF: Trailing Edge
Scanner Edge Margin - DF: Left Edge
0.5 Scanner Edge Margin - DF: Right Edge
Set To:
Printing Erase Margin – Leading Edge
2 Printing Erase Margin – Trailing Edge
Printing Erase Margin – Left Edge
0.5 Printing Erase Margin – Right Edge
Scanner Sub Scan - Leading Edge Reg Adjustment
Scanner Main Scan - Trailing Edge Reg Adjustment
Scanner Main Scan - Registration
Comments
Comments
Comments