2. Appendix 2: Service Program Mode
These SP codes display the length of time that each print head has remained idle
("Leftover"). If a print head remains idle for a long period, this can cause the ink around
the nozzles to dry or become too viscous to produce good quality images. To prevent this
from occurring, the machine automatically executes a maintenance cycle appropriate to
the length of time that the print head has remained idle.
These times are used to determine these operations:
• Print head cleaning and flushing
• Air purging (ink supply, purging, filling/maintenance air purging filling together)
• Ink supply sequence
Time
<10 hr
>10 hr<24
>24 hr.<1 week
>1 week<2 weeks
>2 weeks<45 days
1 Count H1
Idle time for K1 print head.
[0 to 999 999/0/1]
2 Count H2
Idle time for K2 print head.
[0 to 999 999/0/1]
3 Count H3
Idle time for C print head.
[0 to 999 999/0/1]
4 Count H4
Idle time for YM print head.
[0 to 999 999/0/1]
216
Time
16 s
9 s (Power ON)
16 s (Job Start)
3 min.
3 min.
30 min.
Power
Job Start
ON
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Energy Save
No
No
No
Yes
Yes