Ricoh D124-17 Service Manual page 708

1. Appendix 1: Specifications
Paper
Feed Method
Paper Type
Paper Thickness
Paper Rolls
2
Width*
Paper Size W x L
Image Borders
Straight Line Deviation
* Roll holders easy to adjust for 2-in. or 3-in. roll cores.
1
* The machine can handle Middle Eastern paper sizes (450, 600, 900 mm) but they cannot be
2
recognized by the firmware.
* The maximum length applies to normal and recycled paper only. For other types of paper the
3
maximum length is 3,600 mm (142 in.).
4
Roll paper, cut sheets (bypass feed only)
Normal, recycled, ink jet standard, tracing paper, matte film, coated
paper (CAD), coated paper, special paper
Roll 0.068 to 0.2 mm, 51 to 190 g/m
Sheet 0.068 to 0.4 mm, 51 to 220 g/m
Core diameter 2 in./3 in. *
Circumference Less than 176 mm (7 in.)
mm 297, 364, 420,440, 490, 515, 594, 610, 620, 625,
660, 680, 707, 728, 800, 841, 880, 914
in. 11, 12, 15, 17, 18, 22, 24, 30, 34, 36 in.
Max. 914.4 x 15,000 mm (36 x 590 in.) *
Min. 279.4 x 210 mm (11 x 8.3 in.)
Bypass Max. length: 2,000 mm (79 in.)
Roll Less than 3 mm (all edges)
Bypass Leading edge: Less than 3 mm
Trailing edge: Less than 18 mm*
Left/right edges: Less than 3 mm
Vertical Less than ±1/184 mm
Horizontal Less than ±2/841 mm
Angle Less than 1/200 mm
2
2
1
3
4