Smc Reports - Ricoh D124-17 Service Manual

5. System Maintenance Reference
1. Turn the machine off.
2. Remove the SD card slot cover (
3. Insert the SD card that currently holds the application in Slot 2.
4. Insert the original SD card to receive the restored application in Slot 1.
5. Turn the machine on.
6. Enter the SP mode and do SP5873-2 "Undo Exec."
7. Follow the messages on the operation panel to complete the procedure.
8. Exit the SP mode.
9. Turn off the main power switch.
10. Remove both SD cards.
11. Insert the SD card with the restored application in Slot 1.
12. Turn on the main power switch.
13. Check that the application operates normally.

SMC Reports

Printing an SMC Report
The machine automatically switches to ink save mode when it prints an SMC report, so the printed report
will appear faint. If you need a darker printout, print the report to an SD card (next section), and then
print it at normal density.
1. Enter the SP mode.
2. Touch [System SP]
578
x1).