Sc800: Firmware - Ricoh D124-17 Service Manual

SC800: Firmware

SC816 D
SC817 D
Error Codes
Code
0x0000 0000
0x0000 0001
0x0000 0002
0x0000 0003
0x0000 0004
0x0000 0005
0xffff ffff
Example: Data in the self-diagnostic module, system kernel, or root system files are corrupted or do not
exist in OS flash ROM or on the SD card
Energy save I/O subsystem error
The energy save I/O subsystem is defective or this system detected a
controller board error.
• Reboot the machine.
• Replace the controller board.
Monitor error
This is a file detection and electronic file signature check error when the boot
loader attempts to read the self-diagnostic module, system kernel, or root
system files from the OS Flash ROM, or the items on the SD card in the
controller slot are false or corrupted.
• OS Flash ROM data defective
• SD card data defective
• Change the controller firmware.
• Use another SD card.
Meaning
BIOS boot error
Primary boot start load error
Secondary boot load error (Boot3.Elf)
Self-diagnostic module error (Diag.Elf)
Kernel start error (Netbsd)
Root file system file read error (Rootfs)
Other error
SC800: Firmware
CTL
627