Ricoh D124-17 Service Manual page 420

4. Replacement and Adjustment
9. Open SP2103.
• Touch SP2103-003 (Left Edge): Note the setting: 3.0 mm
• Touch SP2103-004 (Right Edge): Note the setting: 3.0 mm
10. At the top of the screen touch [COPY Window].
11. Touch the icon for Paper Input Location 1.
• The width of the paper must be in the range 594 to 841 mm (24 to 34 in.)
12. On the Copy Window touch [Synchro Cut] > [Black & White] > [High Speed Copy].
13. Slide the original guide all the way to the right to the 914 mm or 36 inch mark.
14. Align the right edge of a blank original with the original guide and feed it into the scanner unit.
• The original must be at least 594 mm (24 in.) wide and 210 mm (8.5 in.) long.
15. Touch the [Start] button. The pattern prints.
16. Mark the original with an arrow.
418