Ricoh D124-17 Service Manual page 566

5. System Maintenance Reference
• You can select "3 SD Card" to save the debug information directly to an SD card inserted in
SD card Slot 2.
5. Now touch "5858".
6. Select the events that you want to record in the debug log. SP5858 (Debug Save When) provides
the following items for selection.
1 Engine SC Error
2 Controller SC Error
3 Any SC Error
4 Jam
More than one event can be selected.
Example 1: To Select Items 1, 2, 4
Touch the appropriate items(s). Press "ON" for each selection. This example shows "Engine SC
Error" selected.
Example 2: To Specify an SC Code
Touch "3 Any SC Error", enter the 3-digit SC code number with the control panel number keys,
then press
For details about SC code numbers, please refer to the SC tables in the SC tables.
7. Next, select the one or more memory modules for reading and recording debug information. Touch
[5859].
564
. This example shows an entry for SC670.
Saves data when an engine-related SC code is
generated.
Saves debug data when a controller-related SC Code is
generated.
Saves data only for the SC code that you specify by
entering code number.
Saves data for jams.