Ricoh D124-17 Service Manual page 147

• This SD card (Printer/Scanner Unit Type MPCW1) must remain in SD Card Slot 1 and be removed
only for special procedures like firmware download, application move/undo, etc.
• The Network function, USB Host Function are built in and enabled before the machine leaves the
factory.
• Data Overwrite Security, and Data Encryption are also built into the ROM on the GW controller
board, and enabled before the machine leaves the factory.
Controller Options
The controller options available for this machine are listed in the table below.
Option
Browser Unit Type M5
Data Overwrite Security Unit Type H
Gigabit Ethernet Type B
IEEE 802.11 a/g Interface Unit Type J
IEEE 802.11g Interface Unit Type K
IEEE 802.11 a/g Interface Unit Type J
Copy Data Security Unit Type F
File Format Converter Type M5
No.
D624-02 SD Slot 1 or 2
D377-22 SD Slot 1 or 2
D377-21 Board C
D377-02 Board B (EU)
D377-19 Board B (Other)
D377-01 Board B (NA)
B829-07 Board Installation
D625 Board A
Controller Options
Slot
145