Ricoh D124-17 Service Manual page 168

2. Installation
5. Touch [Extended Feature Settings].
6. Touch [Extended Feature Settings] again.
7. Touch [Install].
8. Touch [SD Card].
9. Touch the [Browser] line. (Source: SD Card Slot 2)
10. Under "Install to:" touch [Machine HDD] then touch [Next]
11. When you see "Ready to Install", check the information on the screen to confirm the previous
selection.
12. Touch [OK]. You will see "Installing..." then "Completed".
13. Touch [Exit] twice to return to the copy screen.
14. Turn the machine off and on with the card still in Slot 2.
15. Open the Browser screen from the "Extended Feature Settings" in User Tools. A message appears if
the installation was successful:
"The MFP Browser was successfully installed."
166