Ricoh D124-17 Service Manual page 129

12. Set the left and right ends of the rolls in the roll unit sockets, and then pull the leading edge of the
paper slightly so that it hangs down.
13. While holding both sides of the leading edge of the paper, rotate and feed the paper up about
1/3 of the distance into the machine.
14. Make sure that the leading edge of the paper passes over the top of the paper guide inside the
machine.
15. Insert the leading edge of the roll paper below the roller at the feed slot, and then feed the paper
into the machine until the machine grabs and pulls the paper slightly. (When the machine detects
the leading edge of the paper, it will grab it and then sound a buzzer.)
16. Re-set the exit stacker rods to their original positions.
17. When you see the cover open alert on the operation panel, close the exit guide.
Main Machine Installation
127