Dress Sensor - Ricoh D124-17 Service Manual

• Repeat Steps 3 to 7 to print another pattern and check the results.
13. If the H2band is lighter than the H1band as shown above:
• At SP3132-002 touch [H2].
• The 94% value displayed can be adjusted only in the range 94 to 97%.
• Enter a higher setting, and then touch [#].
• Repeat Steps 3 to 7 to print another pattern and check the results.
14. Repeat the adjustment of either H1 or H2 until the bands are of equal density.

DRESS Sensor

Preparation
• Move the Carriage Unit with SP2102-4
• Separate the Main Unit from the Scanner Unit
Remove:
• Top cover page 219
page 227
page 205
Carriage Unit
415