Ricoh D124-17 Service Manual page 571

3. Remove the SD slot cover [1] (
4. Insert the SD card [2] with the firmware in SD card Slot 2. (If there is an SD card in Slot 2, remove
it.)
5. Turn on the main power switch. "Program to start firmware update" appears on the operation panel
display.
After approximately 90 sec. the initial firmware update screen appears.
• Only the firmware update applications on the SD card are displayed in the menu. If more than
one update is to be done, the System Copy and Engine updates should always be done first.
6. Look at the numbers in the right (ROM) and left (NEW) columns.
• If the NEW number is higher than the ROM number the application needs to be updated.
• If the numbers are the same, the application does not need to be updated.
7. Press the down arrow to see the next screen.
x1).
System Maintenance Tasks
569