Entrance Sensor, Exit Sensor - Ricoh D124-17 Service Manual

11. Disconnect the housing on the left [A] (
12. Disconnect the housing on the right [B] (
13. Remove the roller housing.

Entrance Sensor, Exit Sensor

Preparation
• Separate the Main Unit from the Scanner Unit
Remove:
• Roll Unit 1 or 2 page 295
• Separate the Roller Housing
1. Disconnect sensor cover [A] (
2. Slide it forward slightly [B] and then remove it.
x1).
x1).
page 205
x1). is the entrance sensor, is the exit sensor.
Roll Units
321