Ricoh D124-17 Service Manual page 117

16. Check the arrangement of the rods. The photo above shows the correct positions of all three rods
inserted through the cloth sleeves.
17. At the front, pass the long rod marked
the right slit [C].
18. Set the end of the rod [A] marked with the "2" decal on the left, in front of the "2" decal on the left
side arm.
19. Set the other end of the rod [B] in the groove of the right side arm.
into the left slit [A], through the center slit [B], and out of
Main Machine Installation
115