CE Login
If you will change the printer bit switches, you must 'log in' to service mode with this SP
before you go into the printer SP mode.
5169
[0 to 1/0/1]
0: Off. Printer bit switches cannot be adjusted.
1: On. Printer bit switches can be adjusted.
5180
Change Count Method Japan Only
5188
Copy NV Version
Copies NV version to another NVRAM.
Note: NVRAM version management automatically initializes the NV for each machine.
5191
Mode Set
This setting determines whether the machine is allowed to move into low power mode
(energy save).
[0 to 1/1/0]
1: Allowed 0: Not allowed
5195
Limitless SW Not Used
Selects the paper feed mode priority (productivity or tray). This is activated only when a
customer selects the "Auto paper Select".
• Productivity priority. Changes the feed station as soon as the machine detects the
priority tray even the paper still remains in the current tray.
• Tray priority. This changes the feeding tray after the paper in the tray where the
machine has been feeding paper has run out of paper.
[0 to 1/0/1]
0: Productivity priority
1: Tray priority
SP5000
151