Disconnecting The Main Unit From The Scanner Unit - Ricoh D124-17 Service Manual

• The rear cover is held in place by many screws but only six screws need to be removed (the others
can just be loosened).
1. Remove the screws marked by red arrows (
2. Loosen (do not remove) the screws marked by the blue arrows (
3. Slide the cover to the right and remove it.

Disconnecting the Main Unit from the Scanner Unit

Preparation
• Separate the Main Unit from the Scanner Unit
Remove
• Rear Cover page 234
x6).
x10).
page 205
Common Procedures
235