Auto Reduce Home Position Adjustment; Tti - Ricoh FAX5600L Operator's Manual

SENDING A FAX MESSAGE

Auto Reduce Home Position Adjustment

You can change the home position of the Auto Reduce setting if you wish. Do not
do this unless the current home position is inconvenient for you, and you often
find yourself having to change the Auto Reduce setting before sending a fax.
The procedure is as follows (see page 10 for more information about the User
Parameter settings adjustment procedure).
1.
Function 6 0 2
At this time, you can print a User
Parameter List if you press
2. The settings for switch 00 are now
shown on the bottom line of the display.
↓
3. Press until the settings for switch 04
are shown. You need to change digit 2.
4. If you wish to change the setting, press
5. Finish:
Yes Function

TTI

Normally, the TTI programmed in your machine is printed at the top of each of the
pages you transmit when they are received at the other end. The top of the image
will be overprinted if there is no margin at the top of the transmitted page.
In some cases, you may wish the other party to receive an unmarked copy of your
original. In this case, you can switch TTI off.
Note: If you switch TTI off, make sure that Label Insertion is also off if you want
the image received at the other end to be unmarked.
Cross-reference
TTI: see page 26.
1. Either:
↓
Press
0 7
If you have previously
programmed this feature as a
User Function Key, press that
key.
64
2 2 2 9 1
USER PARAMETER
DEFAULT:
SWITCH00:
.
→
Start
.
2
Label Insertion: see page 120
OPTION
AUTO REDUCE
ROUTINE OPERATION
PRINT LIST
01000000
TO END
YES
01000000
Digit 2
0: Auto Reduce is Off
1: Auto Reduce is On.
SELECT TO END
YES
ON OFF
TTI