Ricoh D124-17 Service Manual page 929

7405 Maintenance Motor Error SC Count
These SP codes keep a count of the errors that occur with the operation of the
maintenance unit motors.
1 ST Motor (after Replace)
Keeps a count for the occurrences of SC200 that occur after replacement of the lift motor.
SC200 occurs if the lift motor fails to move the maintenance cleaning unit from back to
front (slide sensor did not detect the slide unit at home position).
[0 to 10000/0/1]
2 ST Motor (Accumulated)
Keeps a total count for the occurrences of SC200 that occur during the life of the machine
for the lift motor.
[0 to 10000/0/1]
3 DC Motor (after Replace)
Keeps a count for the occurrences of SC201 that occur after replacement of the
maintenance motor. SC201 occurs if the maintenance motor fails to raise or lower the
suction cap during capping or the maintenance cleaning cycle. (cap sensor did not detect
the K1 suction cap at the up or home position).
[0 to 10000/0/1]
4 DC Motor (Accumulated)
Keeps a total count for the occurrences of SC201 that occur during the life of the machine
for the maintenance motor.
[0 to 10000/0/1]
7502 Total Paper Jam Counter
Displays the total number of copy jams.
1 Jam Counter
2 Total Jam Counter
7503 Total Original Jam Counter
Displays the total number of original jams.
1 Original Jam Counter
SP7000
CTL
CTL
225