3. Preventive Maintenance
• Dry linen cloth.
• After replacing the ink collector unit, always remove ink that has hardened around the wiper blade,
suction cap, and three print head caps.
1. Move the carriage unit to the center.
2. Remove the top cover.
3. Use a tightly wrapped linen cloth dampened with water to clean:
[A] Wiper and blade
[B] Suction cap
[C] Print head caps (x3)
Waste Ink Collection
12 Ink Collector Tank
1. Open the ink collector cover on the right side of the machine.
176
page 227
page 219