2. Appendix 2: Service Program Mode
3 IJ Normal Paper
[0 to 1800/0/1 sec]
5 Translucent
[0 to 1800/0/1 sec]
6 Mat Film
[0 to 1800/15/1 sec]
7 Coated (CAD) Paper
[0 to 1800/0/1 sec]
8 Coated Paper
[0 to 1800/0/1 sec]
10 Special Paper
[0 to 1800/0/1 sec]
3141
Paper Feed Part Correction
This SP code switches off the overlap between K1 and K2. The K1 print head (H1) sits
forward of the K2 print head (H2) in the direction of paper feed. This allows a greater
band of coverage during monochrome printing.
Three nozzles at the rear section of K1
is staggered
down on the paper.
108
overlap the same area on the paper. However, the arrangement of the nozzle ports
so positions of the nozzle ports complement one another when ink is put
and three nozzles at the front section of K2