Ricoh D124-17 Service Manual page 451

Mounting the Carriage
1. After you set the carriage unit on the guide rod, check its position.
2. The felt bushing [A] should be seated snugly on the guide rod.
3. The wheel [B] at the top should be positioned on the race as shown.
Paper Holding Lever
1. When you reattach the paper holding lever, confirm:
• The paper holder lever [1] is level.
• The first gear of each [2] is meshed.
• Actuator [3] is down and in the gap of the registration release sensor.
Carriage Unit
449