Ricoh D124-17 Service Manual page 993

L:FIN Jobs
[0 to 9999999/ 0 / 1]
8066
These SPs total finishing methods for jobs output from within the document server mode
screen at the operation panel. The finishing method is specified from the print window
within document server mode.
O:FIN Jobs
[0 to 9999999/ 0 / 1]
8067
These SPs total finishing methods for jobs executed by an external application, over the
network. The finishing method is specified by the application.
1 Sort
2 Stack
3 Staple
4 Booklet
5 Z-Fold
6 Punch
7 Other
8 Inside-Fold
9 Three-in-Fold
10 Three-Out-Fold
11 Four-Fold
12 Kannon-Fold
13 Perfect Bind
14 Ring Bind
Number of jobs started in Sort mode. When a stored copy job
is set for Sort and then stored on the document server, the L:
counter increments. (See SP8066 1)
Number of jobs started out of Sort mode.
Number of jobs started in Staple mode.
Number of jobs started in Booklet mode. If the machine is in
staple mode, the Staple counter also increments.
Number of jobs started In any mode other than the Booklet
mode and set for folding (Z-fold).
Number of jobs started in Punch mode. When Punch is set for
a print job, the P: counter increments. (See SP8064 6.)
Reserved. Not used.
SP8000
289