General Specifications - Ricoh D124-17 Service Manual

1. Appendix 1: Specifications
Specifications

General Specifications

Configuration
Printing Method
Color
Nozzle Numbers
Memory
HDD Capacity
Originals
Type
Thickness
Scan Method
Delivery
Size (W x L)
* Quality is not guaranteed. A carrier sheet is required for paper less than 0.07 mm thick.
1
* The original guide should be removed for originals thicker than 135 g/m
2
back of the scanner unit.
* • An original up to 960 mm (37.8") wide can pass through the scanning unit but scanned
3
width is limited to 914.4 mm (36").
• Width detection of Arch, ANSI sizes possible at same time.
Console
On-demand piezo inkjet system
Monochrome, Full Color Printing
192 nozzles x 2 lines = 384 nozzles
Black (K): 768, Color (Y, C, M): 192 each
3 GB
250 GB
Sheet
Recommended 0.090 to 0.2 mm (64 to 190 g/m
Possible 0.035 to 1.0 mm*
Face-down, center set
Top stacker or straight-through*
Max. 914.4 x 15,000 mm (36 x 591 in.) *
Min. 210 x 210 mm (8.3 x 8.3 in.)
1
2
3
2
so they can exit the
2
)
3