Ricoh D124-17 Service Manual page 912

2. Appendix 2: Service Program Mode
Switchover Permission Time
If no key is pressed when there is an application with display control rights, these SP
settings allow the system to shift to the application standing by after the specified time as
elapse. This SP switches the switchover permission timer on/off.
5913
[0 to 1/1/1]
0: OFF
1: ON
Copy Server: Set Function
Enables and disables the document server.
• This is a security measure that prevents image data from being left in the temporary
5967
• After changing this setting, you must switch the main switch off and on to enable the
[0 to 1/1/1]
0: ON, 1: OFF
Cherry Server
Selects which version of the Scan Router application program, "Light" or "Full
(Professional)", is installed.
5974
[0 to 1/0/1 /step]
0: Light version (supplied with this machine)
1: Full version (optional)
Device Setting
The NIC and USB support features are built into the GW controller. Use this SP to enable
5985
and disable these features. In order to use the NIC and USB functions built into the
controller board, these SP codes must be set to "1".
1 On Board NIC
[0: Disable] [1: Enable]
2 On Board USB
[0: Disable] [1: Enable]
208
area of the HDD.
new setting.