Ricoh D124-17 Service Manual page 999

Number of front sides fed for scanning:
With an ADF that can scan both sides simultaneously, the Front side count is the same
as the number of pages fed for either simplex or duplex scanning.
With an ADF that cannot scan both sides simultaneously, the Front side count is the
same as the number of pages fed for duplex front side scanning. (The front side is
determined by which side the user loads face up.)
2 Back
Number of rear sides fed for scanning:
With an ADF that can scan both sides simultaneously, the Back count is the same as
the number of pages fed for duplex scanning.
With an ADF that cannot scan both sides simultaneously, the Back count is the same as
the number of pages fed for duplex rear-side scanning.
• When 1 sheet is fed for duplex scanning the Front count is 1 and the Back count is 1.
• If a jam occurs during the job, recovery processing is not counted to avoid double counting. Also,
the pages are not counted if the jam occurs before the first sheet is output.
Scan PGS/Mode
[0 to 9999999/ 0 / 1]
8231
These SPs count the number of pages scanned by each ADF mode to determine the work
load on the ADF.
1 Large Volume
Selectable. Large copy jobs that cannot be loaded in the ADF at one time.
2 SADF
Selectable. Feeding pages one by one through the ADF.
3 Mixed Size
Selectable. Select "Mixed Sizes" on the operation panel.
4 Custom Size
Selectable. Originals of non-standard size.
5 Platen
Book mode. Raising the ADF and placing the original directly on the platen.
SP8000
295