2. Installation
8. Touch the arrow keys to adjust the margins.
• Increasing the value for the top and left margin moves the print position down and to the right.
You will see the blue square move as you change the settings, so you can confirm the effect of
the changes.
Final Settings
1. Check and adjust the date and time settings: User Tool > System Settings > Timer Settings > Set
Date, Set Time.
After Installation
Do these tasks after installation is completed.
1. Make a copy of the Factory Settings Sheet and store the original with the machine.
2. Upload the NVRAM contents to an SD card.
• Insert an SD card in SD card Slot 2 of the machine.
• Do SP5824 to upload the contents of the NVRAM to the SD card.
• Keep the SD card is a safe place.
Moving the Machine
Observe the following precautions when moving the machine to another location in the same room or in
the same building:
• Two people are required to push and move the machine to a new location.
142