Ricoh D124-17 Service Manual page 123

• Special cartridges, the same shape as ink cartridges, are loaded into the ink supply unit. The ink
pumps rotate in reverse to draw the priming fluid out of the print head units and ink supply tubes.
• Never switch the machine off or try to use the operation panel during the following procedure.
• Do not touch the machine while it is draining.
Draining and Filling Procedure
1. Remove the drain cartridges [1] and starter ink cartridges [2] from their packing material.
2. Insert the power cord into a power source.
3. Open the ink cartridge cover.
4. Load the Primer Fluid Drain Cartridges into the ink supply unit, and then close the cover.
5. Turn the machine on.
6. Wait for the machine to beep twice.
Main Machine Installation
121