Cutter Unit - Ricoh D124-17 Service Manual

4. Replacement and Adjustment
Reinstallation
If you are replacing only the cutter blade (not the cutter unit):
1. Go into the SP mode.
2. Open SP7960-002 and then touch [EXECUTE] to reset the counter for the new cutter blade.

Cutter Unit

Preparation
• Separate the Main Unit from the Scanner Unit
Remove:
• Top cover
• Ink cartridge cover
• Front cover
• Paper exit guide
1. Push the cutter from the right side [A] all the way over to the left side of the machine until it stops [B].
350
page 219
page 212
page 220
page 222
page 205