Ricoh D124-17 Service Manual page 878

2. Appendix 2: Service Program Mode
Function Flag
Enables or disables the remote service function.
3
[0 to 1/0/1 /step]
0: Disabled, 1: Enabled
NOTE: This SP setting is changed to "1" after @Remote registor has been completed.
SSL Disable
Uses or does not use the RCG certification by SSL when calling the RCG.
7
[0 to 1/0/1 /step]
0: Uses the RCG certification
1: Does no use the RCG certification
RCG Connect Timeout
8
Specifies the connect timeout interval when calling the RCG.
[1 to 90/30/1 second /step]
RCG Write Timeout
9
Specifies the write timeout interval when calling the RCG.
[1 to 100/60/1 second /step]
RCG Read Timeout
10
Specifies the read timeout interval when calling the RCG.
[1 to 100/60/1 second /step]
Port 80 Enable
Enables/disables access via port 80 to the SOAP method.
11
[0 or 1/0/– ]
0: Disabled, 1: Enabled
RFU (Remote Frimware Update) Timing
Selects the RFU timing.
13
[0 or 1/1/– ]
• 0: RFU is executed whenever update request is received.
• 1: RFU is executed only when the machine is in the sleep mode.
14 RCG Error Cause
174