Ricoh D124-17 Service Manual page 575

• One additional file PRT.CTL is always created. This file contains a list of all files created on the card
by the card save function.
• Previously stored files on the SD card can be overwritten or left intact.
• Card Save SD has "Add" and "New" menu items. Card Save (Add): Appends files to the SD Card
and does not overwrite existing files.
• If the card becomes full, or if all file names are used, an error will be displayed on the operation
panel.
• After the arrow appears, subsequent jobs will not be stored. Card Save (New): Overwrites files in
the card's /prt/cardsave directory.
• Card Save cannot be used with PJL Status Readback commands. PJL Status Readbacks will not
work. In addition they will cause the Card Save to fail.
Procedure
1. Switch the machine off..
2. Insert the SD card into slot 2.
3. Turn the power ON.
4. Enter SP mode, and then touch [Printer SP].
5. Open SP-1001 "Bit Switch".
6. Touch [4] on the operation panel to toggle the switch to "1", and then press
"00010000".
System Maintenance Tasks
. You should see:
573