Ricoh D124-17 Service Manual page 736

2. Appendix 2: Service Program Mode
1922 Sub Scan Feed Adjustment DFU
This SP adjusts the amount of paper feed in the sub scan direction.
1 By-pass Input
[400 to -400/0/1 pulse]
2 By-pass Input (Factory Setting)
[400 to -400/0/1 pulse]
3 Paper Input 1
[400 to -400/0/1 pulse]
4 Paper Input 1 (Factory Setting)
[400 to -400/0/1 pulse]
5 Paper Input 2
[400 to -400/0/1 pulse]
6 Paper Input 2 (Factory Setting)
[400 to -400/0/1 pulse]
7 Feed Offset Forward
[400 to -400/0/1 pulse]
8 Feed Offset Backward
[400 to -400/0/1 pulse]
9 Feed Offset Forward Fc
[400 to -400/0/1 pulse]
10 Feed Offset Backward Fc
[400 to -400/0/1 pulse]
1923 Cutter Operation Adjustment DFU
These SP adjust how the cutter operates.
1 Standby Time Period
32