Ricoh D124-17 Service Manual page 579

Move Execute
"Move Exec" (SP5873-1) moves one application program from the original SD card to another SD
card. The application program is moved from Slot 2 to Slot 1.
1. Turn off the machine off.
2. Remove the SD card slot cover (
3. Insert the original SD card with the application in Slot 2.
4. Insert the SD card to receive the application in Slot 1.
5. Turn on the main power switch.
6. Enter the SP mode and open SP5873-1 "Move Exec."
7. Touch [EXECUTE]
8. When the prompts asks you if you want to continue, touch [EXECUTE].
9. When you see the completed message, exit the SP mode.
10. Turn off the machine.
11. Remove the original SD card from Slot 2.
12. Leave the other SD card in Slot 1.
13. Turn the machine on.
14. Check that the application program runs normally.
15. Tell the customer to store the original SD card in a safe place.
Undo Exec
"Undo Exec" (SP5873-2) restores an application to its original SD card. The application is moved from
Slot 2 to Slot 1.
x1).
System Maintenance Tasks
577