Ricoh D124-17 Service Manual page 837

Displays the AEREF value used to supplement shading processing.
[-512 to 511/0/1]
2 Define Target
This SP sets the correction coefficient used to achieve the optimum adjustment for shading
correction in scanned images.
[0 to 1023/800/1]
3 Digital AE - AEREF Correction Setting
This SP displays and sets the AEF value used to obtain the optimum results for shading
correction in scanned images.
[-63 to 63/25/1]
4 Digital AE -Low Limit
Provides the boundary values to the digital A/E processing address for the scanned
image data
[0 to 255/82/1]
5 Digital AE -Start Position
Defines the start position for digital A/E processing of the scanned image data.
[0 to 25.5/3/0.1]
6 Digital AE -Left Start Position
This SP sets the start position for digital AE processing for scanned image data in the main
scan direction (from the center of the original as a reference point), starting at the left side
of the original.
[0 to 512/60/0.1]
7 Digital AE – Right Start Position
This SP sets the start position for digital AE processing for scanned image data in the main
scan direction (from the center of the original as a reference point), stopping at the right
side of the original.
[0 to 512/60/1]
8 Threshold Level
Sets the target level for shading correction.
[0 to 1023/360/1]
SP4000
133