Ricoh D124-17 Service Manual page 841

[0 to 255/16/1]
8 CIS Joint Adjustment CIS2-3 Sub Scan
[0 to 2815/2580/1]
9 CIS Joint Adjustment CIS3-4 Sub Scan
[0 to 255/104/1]
10 CIS Joint Adjustment CIS4-5 Sub Scan
[0 to 2815/2572/1]
4973 Scan Correction – CIS Scan Setting Difference in Grade Adj.
This SP turns on image adjustment feature that corrects slight misalignment of the image at
the joints of the CIS elements.
[0 to 2/2/1]
0: No adjustment
1: Simple adjustment at joints
2: Gradation adjustment at joint
4975 Prevent Document Fall
This SP sets the scanner unit to hold the trailing edge of the original if it is longer than 450
mm to prevent it from falling on the floor. Use this setting for long originals fed straight out
the back of the machine.
[0 to 1/0/1]
0: The scanner exit roller does not hold the leading edge
1: The scanner exit roller does not release the trailing edge of the original if it is longer
than 450 mm. The original remains in the nip of the exit rollers until it is removed
manually.
4979 Scan Correction
1 Color Conversion Parameter CIS1 b1
[-2048 to 2047/0/1]
2 Color Conversion Parameter CIS1 b11
SP4000
137