Browser Unit - Ricoh D124-17 Service Manual

2. Pass one end of the cable through the bracket and clamp it (
3. Connect the connector [B] to the copy data security board (
4. Connect the other end of the cable to the IPU [C] at CN259 (
5. Connect one end of the FFC to the IPU [A] at CN258 (
6. Pass the other end of the FFC through the plate [B].
7. On the other side of the plate [C], connect the FFC to the copy data security board (

Browser Unit

Accessories
Check the accessories and their quantities against the table below.
No.
1. Browser Unit SD Card
Installation
• Before doing the procedure, turn off the main power switch and unplug the machine from its power
source.
1. Remove the SD card slot cover (
2. Insert the SD card into Slot 1.
3. Reconnect the machine and turn it on.
4. Push [User Tools].
Description
x1).
Controller Options
x1).
x1).
x1).
x1).
Qt'y
1
x1).
165