Ricoh D124-17 Service Manual page 959

7754 After Printing
These SP codes display the amount of ink flushed for each color (ink cartridge) after
every print job.
• Color streaking can occur where the humidity is low, where the machine is used
infrequently, or if a particular color is seldom used.
• After streaking starts the ports will eventually clog.
• To prevent this, ink is purged after every job before capping to clear the print
heads.
1 Flushing Amount K
Count for Black ink.
[0 to 999999/0/1 nl]
2 Flushing Amount C
Count for Cyan ink.
[0 to 999999/0/1 nl]
3 Flushing Amount M
Count for Magenta ink.
[0 to 999999/0/1 nl]
4 Flushing Amount Y
Count for Yellow ink.
[0 to 999999/0/1 nl]
7755 OCFS Check Execution Count
These SP codes display the counts for the number of times the position of the OCFS
feelers were checked after the machine has remained idle.
1 H1
Count for K1.
[0 to 999999/0/1]
2 H2
Count for K2.
[0 to 999999/0/1]
SP7000
255