Ipu - Ricoh D124-17 Service Manual

Re-installation
• Formatting a new hard disk with SP5832-001 s not required but it is strongly recommended.
• You must always execute SP5853 after replacing or formatting the HDD to download the fixed
stamp data from NVRAM. If this is not done, the operator will not have access to the fixed stamps.
• After downloading the stamp data, you must cycle the machine off/on.
1. Turn the machine on and enter the SP mode.
2. If you are installing a new HDD, do SP5832-001 to format the hard disk.
3. Open SP5853 and then touch [EXECUTE]. A screen will display "Loading" as the stamp data is
downloaded.
4. When you see "Completed", the download is finished.
5. Touch [Exit].
6. Cycle the machine off/on.

IPU

Preparation
• Separate the Main Unit from the Scanner Unit
Remove:
• Rear cover page 234
• Controller Board
• Motherboard page 502
page 499
page 205
Boards, HDD
507