Ricoh D124-17 Service Manual page 895

Device Release No.
Sets the device release number of the BCD (binary coded decimal) display.
4
[0000 to 9999/1]
Enter as a decimal number. NCS converts the number to hexadecimal number
recognized as the BCD.
5 Fixed USB Port
Selects the PnP name standardization mode.
[0 to 2/0/1/step]
0: Disable
1: Level 1
2: Level 2
6 PnP Model Name
Specifies PnP name for USB device.
7 PnP Serial Number
Specifies PnP serial number for USB device.
100 Notify Unsupport
Displays or does not display USB unsupport message.
[0 or 1/1/1]
0: Not displayed,
Delivery Server Setting
5845
Provides items for delivery server settings.
FTP Port No.
1
Sets the FTP port number used when image files to the Scan Router Server.
[0 to 65535/3670/1 /step]
IP Address (Primary)
Use this SP to set the Scan Router Server address. The IP address under the transfer tab
2
can be referenced by the initial system setting.
Range: 000.000.000.000 to 255.255.255.255
SP5000
CTL
191