Ricoh D124-17 Service Manual page 770

2. Appendix 2: Service Program Mode
Pre-near end display
Near end display
Ink out
Use this SP to adjust the ink out threshold.
1 K
Ink out alert for K ink cartridge.
[0 to 8/0/1]
2 C
Ink out alert for C ink cartridge.
[0 to 8/0/1]
3 M
Ink out alert for M ink cartridge.
[0 to 8/0/1]
4 Y
Ink out alert for Y ink cartridge.
[0 to 8/0/1]
2258 Ink Filled Volume DFU
Each ink cartridge has an ID memory chip that maps the volume of ink remaining as it
diminishes. The primer fluid drain tanks, used to drain primer fluid from the machine
before initial ink filling at installation, also have ID memory chips that measure the
volume of fluid inside the tank. Use this SP code to acquire the amount of ink or primer
fluid inside an ink cartridge or primer fluid cartridge at any time.
1 K
The amount of ink or fluid in the K cartridge.
[0 to 65 535/0/1 x10 ul]
2 C
66
<color> ink low
Prepare a new <color> ink cartridge
<color> ink out soon
After <color> ink out all printing stops
Ink out