Ricoh D124-17 Service Manual page 233

5. Check the gap on the right side of the maintenance unit.
• There will be no gap if the cleaning unit is forward and the suction cap is up. Go to the next
step to lower the suction cup. Normally, the suction cap will be up.
• There will be a gap if the suction cup is already down. Go to Step 7.
6. Set a screwdriver in hole [A] and rotate it counter-clockwise to lower the suction cap. Use a
flashlight to confirm that the suction cap is down.
7. Set a screwdriver in hole [B] and rotate it clockwise to lower the K2 and color print head caps. Use
a flashlight to confirm that the print head caps are down.
Common Procedures
231