Table of Contents
Advertisement
2. Installation
4. Check several of the sample blocks.
• The left side [A] shows a normal, half-tone pattern with no streaks.
• If the primer fluid did not drain completely, this can cause light streaks to appear in half-tone
areas [B].
5. If you detect any streaking, flush the print head of the color where you see the problem.
• Press [User Tools] on the operation panel.
• Touch [Maintenance] > [Flush Print-heads]
• When the message tells you flushing is completed, repeat the procedure.
• Flush the print heads three times.
Final Adjustments
Caster Lock
1. Lower the caster locks on the left and right front casters to keep the machine from moving.
132
Advertisement
Table of Contents
Troubleshooting
