22. Take the last rod (capped and not marked with a number), and pass it through the round hole in
the arm on the right [A].
23. Push it to the left behind the cloth. Do not push it through the small slits in the cloth.
24. Push the end of the rod through the hole in the arm on the left [B].
25. This completes the installation of the exit stacker.
Changing Exit Stacker Mode
The configuration of the exit stacker can be adjusted for two modes: Basket Mode and Stack Mode.
• Stack Mode. For A0 SEF/A1 LEF paper. The exit stacker is extended so that it is flat and can hold
up to 10 stacked sheets.
Main Machine Installation
117