Rear Cover - Ricoh D124-17 Service Manual

4. Replacement and Adjustment
3. Set a screwdriver in hole [A] and rotate it counter-clockwise to raise the suction cap. Use a
flashlight to confirm that the suction cap is up.
4. Set a screwdriver in hole [B] and rotate it clockwise to raise the K2 and color print head caps. Use
a flashlight to confirm that the print head caps are up.
5. Once again check the gaps at [A]. Both the suction cap and K2/color print head caps should be
up.
6. At the resumption of servicing, be sure to uncap the print heads before you move the carriage unit
manually.

Rear Cover

Preparation
• Separate the Main Unit from the Scanner Unit
234
page 205