Specifications - Mitsubishi FX2N-10GM Hardware / Programming Manual

Melsec-f
Hide thumbs Also See for FX2N-10GM:
Table of Contents

Advertisement

FX Series Positioning Controllers
2.

Specifications

2.1
Power Supply Specifications
Table 2.1: Power Supply Specifications
Item
Power supply
Allowance power
failure time
Power consumption
Fuse
2.2
General Specifications
Table 2.2: General Specifications
Item
Ambient temperature
Surrounding humidity
Vibration resistance
Shock resistance
Noise immunity
Dielectric withstand voltage 500V AC > 1 min, tested between all points, terminal and ground.
Insulation resistance
Ground
Use atmosphere
2.3
Performance Specifications
Table 2.3: Performance Specifications
Item
Number of control
axes
Application PLC
Program memory
Battery
Positioning unit
FX
2N
24V DC -15%, +10%
The operation is continued if the momentary power failure is 5ms or less.
0 to 55 °C (operation). -20 to 70 °C (storage).
35 to 85%,No condensation (operation). 35 to 90% (storage).
Conforms to JIS C0040. 10 to 57Hz: Half 0.035mm amplitude,
Sweep count for X,Y,Z: 10 times (80 min in each direction).
Conforms to JIS C0041. 147m/s
3 times in each direction X, Y, Z.
1,000Vp-p,1µs. 30 to 100Hz, tested by noise simulator.
5MΩ > 500V DC, tested between all points, terminal and ground
Class 3 (100Ω or less)
Ambient conditions to be free of corrosive gases. Dust should be mini-
mal.
FX
-10GM
2N
One axes
Bus connection with FX
occupied is 8 points. An FX
FX
series PLC.
2NC
Built-in RAM (3.8 k steps).
With built-in FX
-32BL type lithium
2NC
battery.
Longevity and about 3 years (The
guaranteed term is 1 year).
Command units: mm, deg, inch, pls, (relativity/absolutely)
Max command value ± 999,999 (32 bits when indirectly specifying)
-10GM
5W
125V AC
Contents
57 to 150Hz: 4.9 m/s
2
acceleration, Action time: 11ms.
Two axes (two axes or two independent
axes simultaneously)
and the FX
series PLC. The number of I/O points
2N
2NC
-CNV-IF is necessary for the connection with the
2NC
Built in RAM (7.8 k steps).
Optional memory board:
FX
2NC
The memory board with the clock func-
tion cannot be used.
With built-in FX
battery.
Longevity and about three years (The
guaranteed term is one year).
Specifications 2
FX
-20GM
2N
10W
1A
2
Acceleration
FX
-20GM
2N
-EEPROM-16 (7.8 k steps).
-32BL type lithium
2NC
2-1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fx2n-20gm

Table of Contents