Mitsubishi FX2N-10GM Hardware / Programming Manual page 141

FX Series Positioning Controllers
Program example (in the FX
cod 31 (INT)
x1500
y1000
f2000;
cod 01 (LIN)
x2000
y1500
f2000;
*1: When the interrupt input X06 is turned ON, the machine is decelerated and stopped. Then,
the machine proceeds to the next positioning while ignoring the remaining distance indi-
cated in dotted line.
*2: The machine moves to the target position if input X06 is not turned ON.
-20GM)
2N
*2
Program format 5
5-31