FX Series Positioning Controllers
1.4
Product composition
1.4.1
Part names
The name and description of each part of the FX
Operation indicator LED
MANU/AUTO switch
Connector for programming tool
I/O display
Connector for PLC extension block
The name and description of each part of the FX
a) Battery (Refer to Section 11.)
b) Operation indicator LED
c) MANU/AUTO switch
d) Connector for programming tool
e) General-purpose I/O display
f) Display for equipment inputs
g) x axis status display
h) Lock to fix extension block of FX
i) y axis status display
j) Connector for FX
-20GM
2N
-20GM extension block
2N
-10GM are explained below.
2N
Hook for DIN rail installation
Connector for motor amplifier: CON2
Connector for I/O: CON1
Connector for power supply
Connector for PLC
-20GM are explained below.
2N
k) Connector for PLC extension block
l) Hook for DIN rail installation
m)Connector for y axis motor amplifier: CON4
n) Connector for x axis motor amplifier: CON3
o) Connector for input equipment: CON2
p) Connector for power supply
q) Connector for general-purpose I/O: CON1
r) Connector for memory board
s) Connector for PLC
Introduction 1
1-4