Mitsubishi FX2N-10GM Hardware / Programming Manual page 29

FX Series Positioning Controllers
g Connection cable to connect general-purpose I/O equipment/terminal block (sold sepa-
rately)
FX-16E-150CAB: Flat cable with connector on each end (1.5 m)
FX-16E-300CAB: Flat cable with connector on each end (3.0 m)
FX-16E-500CAB: Flat cable with connector on each end (5.0 m)
FX-16E-150CAB-R: Round multi-core cable with connector on each end (1.5 m)
FX-16E-300CAB-R: Round multi-core cable with connector on each end (3.0 m)
FX-16E-500CAB-R: Round multi-core cable with connector on each end (5.0 m)
FX-16E-500CAB-S: Cable with connector on only one end (5.0 m)
h Terminal block (sold separately)
For positioning unit/extension block:
For extension block (cannot be connected to positioning unit):
FX-16E-TB, FX-32E-TB
FX-16EY...-TB (... = R, S or T), FX-16EYT-H-TB
Introduction 1
1-17